Moomba Outback LSV Spécifications télécharger pdf (Page 24)

Maximum Capacities

In compliance with United States Coast Guard Regulations,

Moomba Boats meet or exceed all safety standards designed

for recreational boats. To ensure safe handling and

performance, each Moomba boat displays a maximum

capacity sticker (see sample), stating the maximum

passenger weight load allowable.

NOTICE: Refer to the Maximum Capacity Sticker on

your boat for allowable loading.

Do not exceed the maximum capacity of the boat.

Coast Guard Regulations

The United States Coast Guard boating regulations prescribe

minimum standards of safety to be met and maintained by

all watercraft. It is necessary that your boat remain in

compliance with these regulations.

The staff at Skier’s Choice, Inc. recommend that all boat

operators complete a Coast Guard approved boating safety

course.

Your Moomba boat cover is made from the finest canvas

and webbing to ensure that your boat will be protected in

the off season. The cover has been designed to fit securely

around each boat. If your new cover does not seem to be

snug, a shrinkage allowance has been sized in.

Use the following procedure when covering the boat:

1.Be sure that the cover fits snugly at the bow then unfold

from front to back.

2.Be sure to install cover pole(s) and adjust to proper height,

using set screw on pole(s). This will keep water from

gathering in the center, which can damage the cover.

3.Secure all fastening straps around the trailer frame.

4.Pull the draw cord equally from both sides and tie off to

the lifting eyes on the stern in accordance with the

illustration.

Folding Cover

When folding the cover for storage, be sure the cover is dry.

Take care not to scratch the canvas finish against rough

surfaces. Store in a dry location.

Cover Repair

If the cover becomes damaged, immediately patch and

reseal the area. Use a tent seam sealer to reseal any new

stitches. Spray fabric guard on scraped or worn surfaces.

Canvas tears should be repaired professionally and stitches

sealed to prevent leakage.

Your mooring cover is not designed for trailering. Trailering

with your cover installed may cause premature cover failure

and boat damage. This damage is not warrantable.

Canvas Cover

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Moomba Outback LSV Spécifications Page 24

Commentaires sur ces manuels